Simple Heat Sensor Circuit Diagram

This simple heat sensor circuit could senses heat from various electronics device like computer, amplifier etc. and generate warning alarm. It could senses heat from environment also, but here I mention “electronics device” because it is being using mostly in electronic device to protect them from overheat.

Thermistor, 110 Ohms:

Fig-2: 110 Ohms Thermistor

As it is a heat sensor circuit, here a thermistor is used as a heat sensor. It is a thermal measurement device and has a variety of usages including temperature sensor/ heat sensor. The thermistor used in this circuit is a NTC (Negative Temperature Coefficient) type thermistor. When temperature increases, its resistance goes decrease. Therefore, NTC thermistor’s resistances are inverse of temperature.

Circuit Description:

You have seen, in this simple circuit diagram of heat sensor, a few number of components is used including a BC548 transistor, a 110 ohms thermistor etc.

• BC548: BC548 is a TO-92 type NPN transistor, as its alternative you can use 2N2222, BC238, BC548, BC168, BC183 etc. they all have almost same characteristic.
• 110 Ohms Thermistor: A 110 Ohms thermistor is used to detecting heat. I have told already about it.
• Buzzer: A buzzer is used with +9V and collector of transistor. When the temperature/ heat exceeds a certain level then it make an alarm.
• 4.7V Zener diode:  It is used to limit the emitter current of BC548.
• 9V Battery: A 9V battery is used as a single power source.
• R1, R2: A 3.3K 1/4w resistor is used as R1 and 100 ohms 1/4w as R2.
• Switch: Here in this circuit the switch used is a simple SPST switch. You can either use the switch or not, choice is yours. It is not mandatory.
  

Read more

Heat Detector Alarm using UM3561 Circuit Diagram

A very simple heat detector alarm electronic project can be designed using the UM3561 sound generator circuit and some other common electronic parts . This heat detector electronic circuit project uses a complementary pair comprising npn and pnp transistor to detect heat Collector of T1 transistor is connected to the base of the T2 transistor , while the collector of T2 transistor is connected to RL1 relay T3 and T4 transistors connected in darlington configuration are used to amplify the audio signal from the UM3561 ic.

When the temperature close to the T1 transistor is hot , the resistance to the emitter –collector goes low and it starts conducting . In same time T2 transistor conducts , because its base is connected to the collector of T1 transistor and the RL1 relay energized and switches on the siren which produce a fire engine alarm sound. This electronic circuit project must be powered from a 6 volts DC power supply , but the UM3561 IC is powered using a 3 volt zener diode , because the alarm sound require a 3 volts dc power supply. The relay used in this project must be a 6 volt / 100 ohms relay and the speaker must have a 8 ohms load and 1 watt power.

Read more

How to Generate Electricity from Heat or Body Warmth

The present design exploits the above property of tunnel diodes by having a series connected set of these devices charge a battery with the aid of solar energy


The operating principle of this unique design is remarkably simple. 

 As seen in Fig seven or more Gallium-Indium Antimonide (GISp) tunnel diodes are series connected and titted on a large heatsink, which does not serve to dissipate their power (tunnel diodes get colder as Ur rises), but to effectively accumulate solar, or otherwise applied, heat, whose energy is converted into a charge current for the NiCd battery

When the load is itself a voltage source with fairly low internal  resistance, the negative resistance must, of course, output a f higher voltage for the charge I current, Ic, to flow: 

If a normal, pure, resistance, R, discharges a battery with current I=V/R, a negative resistance charges the same battery, since the sign of reverses —I:V/—R. Similarly, , when a normal resistance  pates P=PR watts, a negative  resistance delivers this wattage into the load; P=—l2—R.

The following circuit may be used for generating electricity from heat or warmth.

Credit- Elektor electronics

Read more